-
The SR10W2 was developed for industial battery driven applications. With its extremely large input voltage
range from 9-80VDC it covers a large variety of possible input voltages. In addition to that it is even protected
against transients up to 150V. The output voltages are 5V and 10V with 0,4A and 0,8A max. load.
The converter operates without galvanic isolation. The two regulated output voltages are designed for a
max. continuous output power of 10W with an efficiency of approx. 85%
An external Power/Off-input is integrated. If this input is connected to ground the converter switches on,
otherwise both outputs are disabled. During switch off (input 24VDC) the quiescent current is below 0,2mA.
The qualified temperature range is -30°C- +125°C with a derating of 2,5% from 85°C on.
Due to its moulded design the converter is able to withstand humidity over 93% at 40°C and fulfills
the requirements of the IEC 68-2-27 and IEC 68-2-6 regarding shock and vibration.
An adequate fixation of the 33x33x13mm metal case converter to the PC-board is ensured by 9 solder pins
(diameter 1,0mm).
|
